Answer
Feb 28, 2026 - 08:24 PM
Thank you for your question! Our High Pressure Lines (HPL), not to be confused with our standard, heavy, and premium weave lines (which only go up to 200 PSI), can run up to 1000 PSI. This line is used in our dual tank adapters to support the pressure between the two tanks. We also utilized these for Tippmann rifles, which used air straight from an 800 PSI tank such as a 48/3000 or 68/4500 tank with a standard pressure head on it.
In most cases, all HPA engines will be in the 120 - 200 PSI range. You will need to check the manual for recommended pressures as to not destroy your HPA unit.
Most will operate at 120 psi and below. HPA Magazine adapters for pistols will typically run at 80-100 PSI depending on the pistol being used. It is highly imperative that you do not go over the recommended pressure as it can destroy your pistol.
When it comes to the HPL line, it is also not used for filling tanks as the required pressure needed is way higher than the operating pressure of this line. Typically tank fills require 3000 or 4500 PSI depending on the compressor and tank setup. If you were to use this line, it will fail as it is not designed for that.
Please feel free to reach out to us at sales@ampedairsoft.com if you happen to have any other questions concerning this.
Thank you!
In most cases, all HPA engines will be in the 120 - 200 PSI range. You will need to check the manual for recommended pressures as to not destroy your HPA unit.
Most will operate at 120 psi and below. HPA Magazine adapters for pistols will typically run at 80-100 PSI depending on the pistol being used. It is highly imperative that you do not go over the recommended pressure as it can destroy your pistol.
When it comes to the HPL line, it is also not used for filling tanks as the required pressure needed is way higher than the operating pressure of this line. Typically tank fills require 3000 or 4500 PSI depending on the compressor and tank setup. If you were to use this line, it will fail as it is not designed for that.
Please feel free to reach out to us at sales@ampedairsoft.com if you happen to have any other questions concerning this.
Thank you!
