Hi I have researched a lot and looked at polarstars website but I cant find that it fits the classic army m4 can you confirm that? View answer
PolarStar Fusion Engine V2 M4 | Red Poppet and Nozzle
hello. are the 3 valve O-rings also in the package, the one that usually falls off when you change the nozzle and unscrew the valve View answer
PolarStar Fusion Engine O-Ring Set | Oring Repair Kit
Sorry for the dumb question but when using the ASA Plug, would the Fill Adapter that the Plug is being used on be turned on or off? View answer
Amped Airsoft ASA Dual Tank Plug Adapter
Would this work with the older revision of the fcu? Or only with the rev3 ones? Ive got an old fusion engine that needs a new board. View answer
PolarStar Fusion Engine Trigger Board for V2 Gearbox GEN3
I bought a hk army 48/3000 tank but i saw something about a slp regulated tank do i need to buy a slp tank? View answer
Amped Airsoft SLP Regulator | Amped HPA SLP Rig
So with the red nozzle is it possible to shoot at 300/350 fps or would I need a different nozzleAnd poppet View answer
Amped Custom | Fusion Engine Plus Nozzle for M4 | Purple
if i get this with an upgrade trigger will it come installed in the gear box or will i have to install it? View answer
PolarStar Fusion Engine V2 Player Package | Standard FCU
I ordered the starter pack with a Speed HPA trigger. is it going to come already installed? or am I going to have to do that myself? View answer
Hi there. Can I use this Tank with my Wolverine HPA engine? I have recently installed it and I need help on which tank to buy thanks! View answer
Ninja 48/3000 Aluminum Air Tank | HPA Tanks
I want to use this for a pistol hpa set up do I need it to be a slp line with an slp tank? I'm new so I don't know much to hpa. Thanks! View answer
Amped Line | Amped HPA Line Standard Weave
How does this attach to the hpa system in the gun? Does the regulator come with all of the parts necessary to connect to the hpa system? View answer
Wolverine Airsoft STORM InGrip Regulator | CO2 Ready!
If I select a different trigger, would it come separate? and if so, how would I get it installed? -Thanks View answer
Will this work with Amped Custom HPA Rig - SLP? Overall, ill be using the wolverine inferno gen.2 for M4. View answer
Ninja 62/3000 Aluminum Air Tank | HPA Tanks
I already purchased and have the item but i was wondering, what's the difference between the different types of lines? Also, great items! View answer
The UFA cap goes onto the top of your tank while it's not in use correct? It protects the threads while also keeping debris out of the tank? View answer
Amped Custom Fill Adapter UFA Cap | Cap Only
Hows the refresh rate on this? Im planning on using this on my we scar l gbbr with a hpa tapped drum mag. View answer
What IGL would i need for a Polarstar Jack V2?, I checked the IGL's and there doesn't seem to be one for the jack v2. Am i missing something? View answer
PolarStar Jack V2 HPA Unit | Standard FCU | V2 M4 HPA Kit
If I buy just the line, regulator, and IGL, would all 3 parts work together or would I need another part? View answer
Does the M4 version of this kit include everything to drop into a gearbox like the AK and M249 versions, or are FCU and line separate? View answer
Wolverine Airsoft Inferno GEN 2 for M4 | Premium Edition
Building a Lancer Tactical M4 with your HPA starter kit and Jack. Can your shop techs install it, and do I need anything else? View answer
Will this fit in a A&K PKM? The M249 and PKM both use the same type of gearbox. View answer
PolarStar Fusion Engine for M249 | M249 HPA Unit
Which fitting do I need to connect the stock macro line on a PolarStar Jack? I bought mine used without that piece. View answer
when will you have the lmg the gold fusion engine and 90/4500 carbon ninja tank View answer
Amped Custom HPA Rifle Krytac LMG Enhanced
Will the Jack shipped from you be the 1.1 or 1.0 version? I want to be 100% sure before I order my IGL. View answer
Buying the Inferno player kit here for my ARX160 install. Do I order now and ship my gun and custom nozzle, or wait for the kit? View answer
Amped Airsoft Tech Service Fee for HPA & AEG Repairs / Upgrades
Do this line and the Tippmann 48/3000 tank come with a tournament lock, or can I use a zip tie to lock my tank after chrono? View answer
Amped Custom High Pressure Line | HPL | Tippmann or Storm
hi is there a polarstar fusion engine to fit the krytac lmg and how much is it View answer
Hey amped how do I clean this regulator or maintain it because I am new to HPA View answer
hi guys, I would like difference between red poppet and purple poppet, please. View answer
Amped Custom | Low Flow Pre-Shimmed Purple Poppet
Will this (with the required SLP tank) work for a basic HPA-tapped GBB SMG, or is it only for PolarStar and Daytona setups? View answer
What's the ideal Fusion Engine setup for my KWA KM4? The nozzle choice in particular has been keeping me troubled. View answer
My regulator won't go above 80 PSI, which isn't enough for my new HPA-tapped gas shotgun. Is there a way to fix this? View answer
Amped Airsoft HPA SLP Regulator
My scuba shop says my year-old Amped regulator is leaking from the green cap. How do I fix it and what will I need? View answer
For a Cyma platinum SR25 would the A&K SR25 nossle or the G&G SR25 nossle work View answer
In desperate need of a 13-15" wire harness for the old-school Wolverine SMP. Will this work, or can you help locate one? View answer
Wolverine Airsoft M249 Wire Harness | GEN 1 Latest Edition
Can I bring my AEG in for a PolarStar conversion and buy the tank and Fusion Engine at your shop, or should I buy everything first? View answer
How do I know whether an HPA system is compatible with a rifle I own or am planning to buy? View answer
Has this been discontinued? Or will this be back in stock in the near future? View answer
Amped Custom HPA Rifle - G&G Combat Machine CM18 MOD1
When will the PolarStar Jack and G&G CM16 Raider 2.0 Short be back in stock, and will the Jack work well in that gun? View answer
would this work well with the ump elite without modifications for the trigger View answer
PolarStar Jack V3 HPA Unit | Standard FCU | V3 AK HPA Kit
My brand new regulator makes a snapping noise when I turn the gauge and I can't change output PSI at all. Is there anything I can do? View answer
Does this line include an fps lock or a way to adjust the fps for a polarstar View answer
Do you guys also have a blue and gold one to match the design of my hi capa? View answer
Can I swap just this poppet hat with my stock one? My PolarStar burns air: only ~800 shots from a 48/3000 at 75 PSI with a red nozzle. View answer
Will this attach to the regulator already on HK Army tanks? If not, what else do I need so my Amped hose connects to my HPA setup? View answer
Amped Line Foster Quick Disconnect QD Regulator Adapter
Does this come with a macroline, and will it fit my Cybergun Colt Sportsline M4 with G3 micro-switch gearbox? View answer
Would this be equivalent to a male Foster QD, and what else would I need to fill at home with a high-pressure hand pump? View answer
Ninja - Mini Fill Valve Complete Assembly
My regulator clicks and resets when I try to go past 80 PSI, but it's rated for 120. How do I fix this? View answer
What color is the line in the first photo above the black shorter length one View answer
For Fusion Engine efficiency, this or a low-flow poppet with red nozzle? I want 1500 shots per 48/3000 fill instead of my current 800-1000. View answer
S2 Airsoft Designs Lightning Banjo for PolarStar Fusion Engine
