Is this wire harness compatible with the JACK? View answer
PolarStar Wire Harness 18" for Fusion Engine, JACK, F1, F2
on the black line what color would the text be in? it's not showing any text color images. thanks View answer
Amped Line | Amped HPA Line Standard Weave
Do you have an idea of how long these last with proper care and if i need to clean it a lot? View answer
Amped Custom HPA G&G Combat Machine CM16 SR-L
can you turn the rig around so that the adjustment nob points downward to the tank? View answer
Amped Airsoft HPA SLP Regulator
I have a polarsar fusion and I was going to get this but I don’t know what tank to use. Thanks. View answer
Amped Airsoft SLP Regulator | Amped HPA SLP Rig
Why don't you have the "incredible Hulk" line available yet?The purple and green one View answer
What is the length of the macro line I will receive if I order multiple units? View answer
Amped Airsoft | 6mm Macro Line By the foot
Will this work on a wolverine inferno gen 2 spartan edition, so I can connect a gorilla fcu? View answer
Wolverine Airsoft 18" Wire Harness | GEN 2 Latest Edition
Who is the manufacturer of this wire harness? View answer
PolarStar Wire Harness 13" for Fusion Engine, JACK, F1, F2
Is this fitting suitable for use with HPA? View answer
Foster Male 1/8" NPT Quick Disconnect Plug HPA | Mag Fitting
What type of quick disconnect does this fitting use? View answer
Is this wire harness compatible with the F2? View answer
Hi! Is there an option to use this dual tank system with HPA male connector EU version? View answer
Amped Airsoft | Amped Custom Dual Tank HPL Tippmann Rig
hi is there a polarstar fusion engine to fit the krytac lmg and how much is it View answer
Amped Custom HPA Rifle Krytac LMG Enhanced
If I were to purchase this gun with the wolverine inferno gen 2, what ILP would I need? View answer
Amped Custom HPA G&G Combat Machine CM16 SR-S
When will this unit be in stock and is what’s the difference between the v2 and the V3? View answer
PolarStar Jack V2 HPA Unit | Standard FCU | V2 M4 HPA Kit
Is this wire harness compatible with the Fusion Engine? View answer
Can you fill this with pure nitrogen while the fusion engine is a polarstar jack v2 M4 View answer
Ninja 62/3000 SLP Aluminum Air Tank | HPA Tanks
How to reattach the cap if taken off while it’s hooked up jot a air tank with air View answer
If i were to buy the spartan edition niw could i later upgrade it to the bluetooth fcu View answer
Wolverine Airsoft INFERNO GEN 2 Spartan Edition for M4 / V2
I have a version 2 gearbox will this fit in my gun if I already have a version 2 gearbox stock in it View answer
PolarStar Fusion Engine V2 Player Package | Standard FCU
what is the average Shot count on this tank. i am running a polstar jack at around 90 psi View answer
Ninja 48/3000 Aluminum Air Tank | HPA Tanks
Does this gun come pre built with all the parts you selected in it or do I have to put them in myself View answer
Amped Custom HPA Rifle - G&G Combat Machine CM18 MOD1
Is this lubrication suitable for use with HPA units? View answer
TechT 1oz Gun Sav Lubrication | Internal Lubrication
Do you have any lines with ptc checks for tippmann View answer
HPA > Amped Lines, Grip Lines & HPA Lines
Can I use this on an MTW with a Reaper M engine, Wraith CO2, normal grip line, and Storm reg on tank? Any reason it wouldn't work? View answer
Wolverine Airsoft Wraith Dual Air Source Kits
Is this spring compatible with the PolarStar Fusion Engine? View answer
PolarStar Heavy Nozzle / Poppet Spring - FE/F2/Kythera
Will this fitting itself be safe at 180-200 PSI with a Wolverine BOLT powered system? Line size conversion is already handled. View answer
Redline Grip Connect | HPA Grip Connect
When will you restock, how many years does the hydro coat last, and how many recoats can a tank get before it needs replacing? View answer
I have a 1.1 Jack and your 7.4v brick battery, but with this line installed I can't connect the battery. Can I get some assistance? View answer
Do you need thread tape with this, and where does it thread? Does the UFA include an o-ring, and does it work with the Firebase regulator? View answer
Amped Custom | Amped Fill Adapter | UFA | Green
Are the four small o-rings that sit on the top and bottom of the solenoid included in this set? That's where most of my leaks are. View answer
PolarStar Fusion Engine O-Ring Set | Oring Repair Kit
This says it's an Amped Custom HPA rifle. What exactly is custom about it? Gun hunting for my brother. View answer
Amped Custom HPA G&G Combat Machine Fire Hawk AEG
Is the Lightning Banjo suitable for long barrel setups? View answer
S2 Airsoft Designs Lightning Banjo for PolarStar Fusion Engine
Is the Lightning Banjo compatible with the M249 Fusion Engine? View answer
Does this trigger board have a click on the button? I want one like the PolarStar Jack F1/F2 boards that have no click. View answer
PolarStar Fusion Engine Trigger Board for V2 Gearbox GEN3
If I send in my gun for an HPA engine install, could you also install a speed trigger and an IGL at the same time? View answer
Amped Airsoft Tech Service Fee for HPA & AEG Repairs / Upgrades
Since the Ninja PTC is discontinued, is it relatively easy to remove the slide check and replace it with a Valken PTC? View answer
Amped Custom High Pressure Line | HPL | Tippmann or Storm
Is there a semi-auto fire rate limit, or can this achieve a high semi rate? Is it a good choice for speedsoft? View answer
Will this trigger board work with the ProTech MK2 HPA engine? It's the last part I need for my V3 conversion. View answer
Wolverine Airsoft V3 Gearbox Trigger Board | GEN2 V3 AK
What's the thread type and size of the output port connector, meaning the threaded connection between regulator body and fitting? View answer
what a m249 engine different with a M4 engine does it only have different with the nozzle, whats gonna happen when im using the m60 nozzle with m4 ? View answer
Wolverine Airsoft Inferno GEN 2 for M249 | Premium Edition
Hello, are you still doing HPA installations? If so i have a Arcturus M4E3, could you install Polorstar V2 unit in it? I heard its a tricky install. View answer
Hi, i am just getting into the HPA side of airsoft and was wondering will I have to get this tank tested like paintball tanks and things like that? View answer
Do I need to purchase a adapter for for the JACK while having a SLP regulator or does it come with it, if so can you tell me which adapter it its? View answer
Is the diameter of the gun side connector 4mm or 8mm? I have a jack and was wondering if this connector is compatible with the standard jack line. View answer
I have a polarstar jack installed in my m4 and I noticed that when I shoot it curves to the right at longer distances, what can I do to fix this. View answer
Is the Lightning Banjo compatible with low flow poppets? View answer
Can I get about 820 fps with this nozzle, pdi Raven 6.01 690 mm barrel and, if I need, custom poppet? BB 0.2 g or about 650-700 fps with bb 0.4 View answer
Amped Custom | Fusion Engine Plus Nozzle for M4 | Purple
