What happens if I tamper with or modify the product? View answer
PolarStar Jack V2 Player Package | Standard FCU | HPA Kit
Can the Lightning Banjo be used with shims? View answer
S2 Airsoft Designs Lightning Banjo for PolarStar Fusion Engine
Is this harness compatible with V3 SMP units? View answer
Wolverine Airsoft 14" Wire Harness | V2 M4 Latest Edition
With this nozzle, purple poppet, Lightning banjo, and 280mm barrel, can I tune the PSI low enough for 320 FPS with .20s? View answer
Amped Custom | Fusion Engine Plus Nozzle for M4 | Purple
Is the Lightning Banjo compatible with stock poppets? View answer
will the gold one fit in this https://www.evike.com/products/89470 / EMG F-1 Firearms Officially Licensed UDR-15-3G Full Metal M4 Receiver Set? View answer
PolarStar Fusion Engine V2 Player Package | Standard FCU
Is this harness compatible with Hydra units? View answer
Is this the line I would need for this gun?https://www.evike.com/products/93355/I want to hook up 2 48/3000 tippman tanksThanks in advance. View answer
Amped Airsoft | Amped Custom Dual Tank HPL Tippmann Rig
What color is the nozzle that comes with the engine? View answer
PolarStar Fusion Engine V2 M4 | Red Poppet and Nozzle
What IGL would i need for a Polarstar Jack V2?, I checked the IGL's and there doesn't seem to be one for the jack v2. Am i missing something? View answer
PolarStar Jack V2 HPA Unit | Standard FCU | V2 M4 HPA Kit
The threads on my redline stripped out on the part that screws onto the tank. would I be able to replace the tank part from redline with this View answer
Amped Custom | Amped Fill Adapter | UFA | Green
Is installation of the Lightning Banjo easy? View answer
Will this product work with the Redline Mini SFR air rig? New to HPA and want to be sure everything works before investing. View answer
Ninja 62/3000 Aluminum Air Tank | HPA Tanks
I use my P* with 20" barrel at 520 fps. Is there any point to install Low Flow Poppet with S2 Lightning Banjo or S2 LB will be sufficient? View answer
PolarStar Fusion Engine Red Low Flow Poppet (.0625)
What pressure range does the Lightning Banjo work at? View answer
Does the fitting on the Daytona single QD self seal, or does the air need to be turned off in order to disconnect the line from the gun? View answer
Amped Line | Amped HPA Line Standard Weave
Is this wrench compatible with the Fusion Engine IGL? View answer
Amped Airsoft 5/16" Hex Economy Wrench | PIGL/IGL
What are the firing modes available with this engine? View answer
Is this nozzle a good option for DMR or sniper builds? View answer
Hi there. Can I use this Tank with my Wolverine HPA engine? I have recently installed it and I need help on which tank to buy thanks! View answer
Ninja 48/3000 Aluminum Air Tank | HPA Tanks
Would this work with the older revision of the fcu? Or only with the rev3 ones? Ive got an old fusion engine that needs a new board. View answer
PolarStar Fusion Engine Trigger Board for V2 Gearbox GEN3
In desperate need of a 13-15" wire harness for the old-school Wolverine SMP. Will this work, or can you help locate one? View answer
Wolverine Airsoft M249 Wire Harness | GEN 1 Latest Edition
Can you independently adjust the velocity and cyclic rate? View answer
Are the lines tested before shipping? View answer
Amped Custom High Pressure Line | HPL | Tippmann or Storm
What type of gameplay is this line designed for? View answer
Is this Fire Control Unit more compact than previous versions? View answer
PolarStar FCU | Fire Control Unit | Revision 3
Can I use Amped IGL lines with this kit? View answer
Is this buffer tube adapter compatible with Wolverine HPA units? View answer
Wolverine Airsoft Buffer Tube Adapter | HPA Install Parts
Is this wiring harness compatible with the PKM airsoft gun? View answer
Could I in theory use this with a p90 hop up (not gearbox. just hop up)? View answer
Can this wiring harness be used with the M60 airsoft gun? View answer
Is this wiring harness compatible with the M249 airsoft gun? View answer
If I ordered this now would it most likely be shipped before Christmas? View answer
Wolverine Airsoft STORM InGrip Regulator | CO2 Ready!
Hello I was wondering the dimensions of the 62 cubic inch tank Thanks! View answer
Ninja 62/3000 SLP Aluminum Air Tank | HPA Tanks
How many moving parts are in the system? View answer
What is the thread size of this fitting? View answer
Amped Line Foster Mini Quick Disconnect Plug | Fitting Only
What is PolarStar known for in the airsoft industry? View answer
Who manufactures this shim kit? View answer
PolarStar Shim Kit | Fusion Engine Installation Shim Kit
This works with the stock macro line the polarstar jack brings right? View answer
Amped Airsoft Air Rig Mini Quick Disconnect Plug Gun Side | 6mm
What is the thickness of the 0.025" shim in the kit? View answer
Are there any specific shipping restrictions for this product? View answer
PolarStar Jack M249 Player Package | Standard FCU | HPA Kit
Is custom text available for this product? View answer
Can I expedite my order for faster service? View answer
Amped Airsoft Tech Service Fee for HPA & AEG Repairs / Upgrades
I have a gng CQB 16 raider will this product work for my application View answer
Will this fit the thread on the amped Tippman integrated grip line? View answer
Ninja Slide Check | HPA Regulator Accessories
Is the line tested before shipping? View answer
Hello,Will this work for the Redline N7 Milsim Gen 2?Thank You View answer
Redline Grip Connect | HPA Grip Connect
Hi, I have a g&g ssg-1 will I need to purchase a new hopup.Thanks View answer
I've got a hk 416a5 will this fit my gun or is it not compatible? View answer
What is the difference between the blue and red poppet and nozzle View answer
