Could I in theory use this with a p90 hop up (not gearbox. just hop up)? View answer
PolarStar Jack V2 HPA Unit | Standard FCU | V2 M4 HPA Kit
Will this unit work with g&g cm16? View answer
can i use this tank for airsoft View answer
Ninja 62/3000 Aluminum Air Tank | HPA Tanks
does it come full of compressed air? View answer
Does this fitting have a hex key backing to install into a eurotactics grip? Thank you View answer
Amped Airsoft | 1/4" Slip Fit Fitting 1/8 MNPT | Stainless
If I select a different trigger, would it come separate? and if so, how would I get it installed? -Thanks View answer
PolarStar Fusion Engine V2 Player Package | Standard FCU
what is the difference in the jack 1.0 and 1.1? View answer
Amped Line | Amped HPA Line Standard Weave
What is the thredding? View answer
Amped Custom HPA Rifle - G&G Combat Machine CM18 MOD1
Do this line and the Tippmann 48/3000 tank come with a tournament lock, or can I use a zip tie to lock my tank after chrono? View answer
Amped Custom High Pressure Line | HPL | Tippmann or Storm
What type of aluminum is it made of? 6061? 6063? 7075? View answer
Amped Custom Fill Adapter UFA Cap | Cap Only
How much does this gun way? It doesn't say in the description View answer
When will you restock, how many years does the hydro coat last, and how many recoats can a tank get before it needs replacing? View answer
Ninja 62/3000 SLP Aluminum Air Tank | HPA Tanks
Would this work with the mrs regulator? View answer
Ninja 48/3000 Aluminum Air Tank | HPA Tanks
Can you go over 120 psi ? View answer
Amped Airsoft HPA SLP Regulator
Will this valve work on Sig Sauer 13ci air tank? Original fill valve lasted one fill and started leaking down View answer
Ninja - Mini Fill Valve Complete Assembly
I have a polarsar fusion and I was going to get this but I don’t know what tank to use. Thanks. View answer
Amped Airsoft SLP Regulator | Amped HPA SLP Rig
What in total do i need to get if i do get the jack kit? View answer
Hi! Will this work with the 120$ Redline mini sfr regulator View answer
Hey so I plan on fitting this setup to this specific gun. Would it work? https://www.evike.com/products/74811/ View answer
Will this fit in my kwa km4a1? Full metal View answer
This works with the stock macro line the polarstar jack brings right? View answer
Amped Airsoft Air Rig Mini Quick Disconnect Plug Gun Side | 6mm
I can put this on the stock macro line that the polarstar jack brings right? View answer
When purchasing this and adding a Speed HPA Blade Trigger does the trigger come pre installed in the engine or would I have to do it myself? View answer
So with the red nozzle is it possible to shoot at 300/350 fps or would I need a different nozzleAnd poppet View answer
Amped Custom | Fusion Engine Plus Nozzle for M4 | Purple
I'm looking for a unit for my a&k mk60. Will this work for it? View answer
PolarStar Jack M249 HPA Unit | Standard FCU | M249 HPA Kit
do the hpa builds come with a line already on it or what View answer
Amped Custom HPA G&G Combat Machine CM16 SR-S
What's the max output of this regulator: 160 or 200 PSI? And what connector attaches the hose to the gun? Building something custom. View answer
When will this unit be in stock and is what’s the difference between the v2 and the V3? View answer
When will they restock and what is the difference between the v2 Jack and the V3?? Thank you View answer
is this a 1,0 or a 1.1? i was trying to order an igl. View answer
I see it says firebase and SLP, does that include the Redline SFR Gen 1? View answer
Amped Line Foster Quick Disconnect QD Regulator Adapter
Hey I just picked up a ssg1 I’m wondering if it will fit? View answer
For Fusion Engine efficiency, this or a low-flow poppet with red nozzle? I want 1500 shots per 48/3000 fill instead of my current 800-1000. View answer
S2 Airsoft Designs Lightning Banjo for PolarStar Fusion Engine
Since the Ninja PTC is discontinued, is it relatively easy to remove the slide check and replace it with a Valken PTC? View answer
Will this fit the thread on the amped Tippman integrated grip line? View answer
Ninja Slide Check | HPA Regulator Accessories
Wanted to confirm, this comes with the premium FCU right? View answer
Wolverine Airsoft Inferno GEN 2 for M4 | Premium Edition
Do you know if this will be compatible with the Gorilla FCU? View answer
Wolverine Airsoft V2 Trigger Board | GEN3 V2 Gearbox M4
Do you guys also have a blue and gold one to match the design of my hi capa? View answer
I have a redline regulator, I should definitely also buy the redline adapter that comes with your line correct? View answer
Will this work in gen2 v3 fusion engine? View answer
PolarStar Wire Harness 18" for Fusion Engine, JACK, F1, F2
will this one fit in my arp 9 View answer
Does the cylinder that comes with it fit a bar 10, or only the vsr 10? I have read both. View answer
Wolverine Airsoft BOLT System for VSR-10 w/ Cylinder for TM and JG
I am just getting into airsoft HPA I was wondering will this work for a Wolverine SMP View answer
Does this work with quick disconnects that have shutoff springs inside? Those tend to require longer shafts. View answer
Amped Line Foster Mini Quick Disconnect Plug | Fitting Only
Is this the Gen3 v2 FE for m4 View answer
PolarStar Fusion Engine V2 M4 | Red Poppet and Nozzle
Is this the line I would need for this gun?https://www.evike.com/products/93355/I want to hook up 2 48/3000 tippman tanksThanks in advance. View answer
Amped Airsoft | Amped Custom Dual Tank HPL Tippmann Rig
Will this be able to fit into a krytac crb mk2 View answer
Wolverine Airsoft INFERNO GEN 2 Spartan Edition for M4 / V2
I have a krytac crb mk2 will this just drop in? View answer
Will the redline n7 need a battery View answer
Amped Custom HPA Black G&G Combat Machine CM16 Raider Short
Can I put drop this in a krytac crb mk2? View answer
