Is this system a drop-in replacement for AEGs? View answer
PolarStar Jack M249 Player Package | Standard FCU | HPA Kit
Can this product be disassembled by hand? View answer
What kind of warranty comes with this product? View answer
Is the product available as both a standalone and as a kit? View answer
Is this product compatible with VFC M4 platforms? View answer
Why is a direct air path and minimum dead volume beneficial in this product? View answer
PolarStar Jack V3 HPA Unit | Standard FCU | V3 AK HPA Kit
Is prior authorization required before sending in my gun? View answer
Amped Airsoft Tech Service Fee for HPA & AEG Repairs / Upgrades
What is the thickness of the smallest shim in the kit? View answer
PolarStar Shim Kit | Fusion Engine Installation Shim Kit
What type of wire harness is this? View answer
Wolverine Airsoft 18" Wire Harness | GEN 2 Latest Edition
What is the thickness of the 0.032" shim in the kit? View answer
What is the thickness of the largest shim in the kit? View answer
What are all the shim sizes included in the kit? View answer
What feedback have users given about the prototype low flow poppets? View answer
PolarStar Fusion Engine Red Low Flow Poppet (.0625)
Is this fitting a replacement part? View answer
Amped Line Foster Mini Quick Disconnect Plug | Fitting Only
Is this fitting commonly found on air rigs? View answer
What size air input line does this fitting work with? View answer
PolarStar Fusion Engine Cylinder Input Fitting 6mm
Is this poppet suitable for users aiming for a maximum of 400 FPS with a .25g BB or using longer barrels? View answer
Will the Ninja slide check block or restrict air flow when it is open? View answer
Ninja Slide Check | HPA Regulator Accessories
What material is the 45 degree elbow adapter made from? View answer
Foster / ZSI - 45 Degree Brass Elbow Adapter with 1/8" MNPT and 1/8" FNPT
What angle does the elbow adapter feature? View answer
What size is the male thread on the adapter? View answer
Can this buffer tube adapter be used as a replacement part? View answer
Wolverine Airsoft Buffer Tube Adapter | HPA Install Parts
What is Foster known for in the fittings industry? View answer
Is this line recommended for CO2 use? View answer
Amped Custom High Pressure Line | HPL | Tippmann or Storm
Is this line compatible with Storm InGrip HPA guns? View answer
Will this solenoid work in my V3 Fusion Engine? The description says all FE, but mine has wires out the top, not the back. View answer
PolarStar Fusion Engine Solenoid | PolarStar Solenoid R107
Would this be compatible for installation on the PolarStar Kythera, mounted on a Magpul MOE grip? View answer
Redline Grip Connect | HPA Grip Connect
Is a 6mm hose included if I have an older system? View answer
Does it make the rifle look cleaner when disconnected from the air system? View answer
Are tanks included with this rig? View answer
Amped Airsoft Dual Tank SLP Rig | HPA Rig
Is this harness compatible with Inferno units? View answer
Wolverine Airsoft 14" Wire Harness | V2 M4 Latest Edition
What color is the low flow poppet included with the engine? View answer
PolarStar Fusion Engine V2 M4 | Red Poppet and Nozzle
Is this compatible with the Redline Mini SFR stand-alone regulator and the Primary Airsoft Glock HPA M4 magazine adapter? View answer
Amped Line | Amped HPA Line Standard Weave
Is 360 FPS with .25g BBs possible at 70-80 PSI with a red poppet, QEV banjo, Madbull 6.03 363mm barrel, and stock blue bucking? View answer
Amped Custom | Fusion Engine Plus Nozzle for M4 | Purple
Where is this engine designed and manufactured? View answer
Is there a break-in period for the regulators? View answer
Is this harness compatible with V2 SMP units? View answer
What's the ideal Fusion Engine setup for my KWA KM4? The nozzle choice in particular has been keeping me troubled. View answer
PolarStar Fusion Engine V2 Player Package | Standard FCU
My regulator won't go above 80 PSI, which isn't enough for my new HPA-tapped gas shotgun. Is there a way to fix this? View answer
Amped Airsoft HPA SLP Regulator
Will the Redline grip connect work with my VFC MK18 with the Redline SR-M Hurricane V2? I keep ripping the fitting off my macro line. View answer
What color is the .015 shim? View answer
Amped Custom - Fusion Engine Poppet Shims | Pack of 4
Does the engine support open bolt and closed bolt firing modes? View answer
What color is the .025 shim? View answer
What is the recommended maximum combined thickness of shims? View answer
I cut my Jack's line too short. Will this work with my Jack and ESG grip, and do I also need to replace the brass tube connector? View answer
Amped Airsoft | 6mm Macro Line By the foot
Does this package include a Fire Control Unit (FCU)? View answer
PolarStar Jack V2 Player Package | Standard FCU | HPA Kit
How do these systems compare to the F1 in terms of reliability and performance? Wanting tips before my Black Friday order. View answer
Wolverine Airsoft INFERNO GEN 2 Spartan Edition for M4 / V2
I received two different solenoid types for the Fusion Engine. Do I need to return one, or will both work properly in my engine? View answer
Estimated FPS with this nozzle, red low-flow poppet, Prometheus 6.03 300mm, Pro-Win, purple bucking, and Firefly nub at 120 PSI, .25g BB? View answer
Is this fitting compatible with lines that use Foster Coupler Fittings? View answer
Amped Airsoft - Shop Compressor Adapter | Line Adapter
