Will this fitting itself be safe at 180-200 PSI with a Wolverine BOLT powered system? Line size conversion is already handled. View answer
Redline Grip Connect | HPA Grip Connect
When will you restock, how many years does the hydro coat last, and how many recoats can a tank get before it needs replacing? View answer
Ninja 62/3000 SLP Aluminum Air Tank | HPA Tanks
Do you need thread tape with this, and where does it thread? Does the UFA include an o-ring, and does it work with the Firebase regulator? View answer
Amped Custom | Amped Fill Adapter | UFA | Green
Are the four small o-rings that sit on the top and bottom of the solenoid included in this set? That's where most of my leaks are. View answer
PolarStar Fusion Engine O-Ring Set | Oring Repair Kit
This says it's an Amped Custom HPA rifle. What exactly is custom about it? Gun hunting for my brother. View answer
Amped Custom HPA G&G Combat Machine Fire Hawk AEG
Do I only need to update the trigger board for the newer wiring harness? My SMP is from 2014. Will the FCU still be compatible? View answer
Wolverine Airsoft 14" Wire Harness | V2 M4 Latest Edition
I've heard the Fusion Engine doesn't like the Krytac lower. Is that still true with later engine models, and if so, how do I fix it? View answer
PolarStar Fusion Engine V2 M4 | Red Poppet and Nozzle
My Gen 2 FE wires quit and the Gen 1 swap worked, so would I be able to put this in my Gen 1 Fusion Engine? View answer
PolarStar Wire Harness 18" for Fusion Engine, JACK, F1, F2
Does this trigger board have a click on the button? I want one like the PolarStar Jack F1/F2 boards that have no click. View answer
PolarStar Fusion Engine Trigger Board for V2 Gearbox GEN3
What is a buffer tube? I know what the rail and external barrel are, but not this term. Do you have pictures? View answer
Amped Custom HPA Rifle G&G Combat Machine CM16 Wild Hog 12" | Black
If I send in my gun for an HPA engine install, could you also install a speed trigger and an IGL at the same time? View answer
Amped Airsoft Tech Service Fee for HPA & AEG Repairs / Upgrades
Since the Ninja PTC is discontinued, is it relatively easy to remove the slide check and replace it with a Valken PTC? View answer
Amped Custom High Pressure Line | HPL | Tippmann or Storm
Do you carry the wire that connects to the Jack itself? Mine broke, and without a replacement I'd have to buy a whole new Jack. View answer
PolarStar Jack V2 HPA Unit | Standard FCU | V2 M4 HPA Kit
Is there a semi-auto fire rate limit, or can this achieve a high semi rate? Is it a good choice for speedsoft? View answer
Wolverine Airsoft INFERNO GEN 2 Spartan Edition for M4 / V2
Will this trigger board work with the ProTech MK2 HPA engine? It's the last part I need for my V3 conversion. View answer
Wolverine Airsoft V3 Gearbox Trigger Board | GEN2 V3 AK
The line came in and when I put it directly on the tank, air just poured out the other side. Is this supposed to happen? View answer
I've seen a Tippmann M4 setup with 3 tanks mounted inside a plate carrier. Can you go triple tanks with this sort of setup? View answer
Amped Airsoft Dual Tank SLP Rig | HPA Rig
What's the thread type and size of the output port connector, meaning the threaded connection between regulator body and fitting? View answer
Amped Airsoft HPA SLP Regulator
I can't add this to my cart. Every HPA engine option I choose says it's unavailable. Can you help? View answer
Amped Custom HPA Rifle - G&G Combat Machine CM18 MOD1
I was wondering if you guys could install a polarstar jack in my A&K masada. What would I need to select in the cart other than this service? Thanks. View answer
In this gun I am looking for range and accuracy so what hop up unit bucking and barrel setup would you recommend for the polarstar jack in this gun. View answer
Amped Custom HPA Black G&G Combat Machine CM16 Raider Long
do i need to get the Industrial Weave grip line if i get the industrial line? and is it wroth it to get the industrial or Premium line or grip line? View answer
PolarStar Fusion Engine V2 Player Package | Standard FCU
Hello, are you still doing HPA installations? If so i have a Arcturus M4E3, could you install Polorstar V2 unit in it? I heard its a tricky install. View answer
Hi, i am just getting into the HPA side of airsoft and was wondering will I have to get this tank tested like paintball tanks and things like that? View answer
Ninja 48/3000 Aluminum Air Tank | HPA Tanks
Im new to the HPA world and will this conact to a 'CQB Russian HPA adapter", what does regulator adapting and gun side fitting last 2 options mean? View answer
Amped Line | Amped HPA Line Standard Weave
Do I need to purchase a adapter for for the JACK while having a SLP regulator or does it come with it, if so can you tell me which adapter it its? View answer
Is the diameter of the gun side connector 4mm or 8mm? I have a jack and was wondering if this connector is compatible with the standard jack line. View answer
Amped Airsoft SLP Regulator | Amped HPA SLP Rig
I have a polarstar jack installed in my m4 and I noticed that when I shoot it curves to the right at longer distances, what can I do to fix this. View answer
I'm having a problem with my jack the first or second shot when I start shooting just barely rolls out of the barrel and I have the flu set to f1 View answer
Is it safe to run this line without a regulator. And if so do I just hook up to the tank and then connect to the gun and then its all good to go? View answer
Can I get about 820 fps with this nozzle, pdi Raven 6.01 690 mm barrel and, if I need, custom poppet? BB 0.2 g or about 650-700 fps with bb 0.4 View answer
Amped Custom | Fusion Engine Plus Nozzle for M4 | Purple
what's are the names of the lines that are the yellow,pink, and black and the other line that is green, purple, and black. Please and thank you View answer
Is this the line I would need for this gun?https://www.evike.com/products/93355/I want to hook up 2 48/3000 tippman tanksThanks in advance. View answer
Amped Airsoft | Amped Custom Dual Tank HPL Tippmann Rig
Will this work for a Gen2 Fusion engine or will I need to modify it? Also is there a way to have the whole thing grip lined and no macro line? View answer
PolarStar Milsim Fitting | 90 Degree Rear Macro Fitting
Do I have to ship it or can I drop it off and pick it up. I work very close to Pittsburgh. Just curious cause it would be easier then shipping View answer
Hi everyone,what I need for installing JACK unit? I need better Gearbox (CNC aluminium) or is OK standard gearbox...ordinary? Thank you guys. View answer
What IGL would i need for a Polarstar Jack V2?, I checked the IGL's and there doesn't seem to be one for the jack v2. Am i missing something? View answer
The threads on my redline stripped out on the part that screws onto the tank. would I be able to replace the tank part from redline with this View answer
The UFA cap goes onto the top of your tank while it's not in use correct? It protects the threads while also keeping debris out of the tank? View answer
Amped Custom Fill Adapter UFA Cap | Cap Only
When purchasing this and adding a Speed HPA Blade Trigger does the trigger come pre installed in the engine or would I have to do it myself? View answer
I use my P* with 20" barrel at 520 fps. Is there any point to install Low Flow Poppet with S2 Lightning Banjo or S2 LB will be sufficient? View answer
PolarStar Fusion Engine Red Low Flow Poppet (.0625)
I already purchased and have the item but i was wondering, what's the difference between the different types of lines? Also, great items! View answer
How does this attach to the hpa system in the gun? Does the regulator come with all of the parts necessary to connect to the hpa system? View answer
Wolverine Airsoft STORM InGrip Regulator | CO2 Ready!
Does the fitting on the Daytona single QD self seal, or does the air need to be turned off in order to disconnect the line from the gun? View answer
I want to use this for a pistol hpa set up do I need it to be a slp line with an slp tank? I'm new so I don't know much to hpa. Thanks! View answer
When are you planning on getting more of these I would like to purchase one right away. I already signed up the for e-mail notification View answer
How do I enable the tournament lock on this regulator? Just got it with my Jack player kit and a local field requires a tourney lock... View answer
How would I attache the tippman remote line to it. Does this regulator come with that attachment point and if not where would I get it View answer
Will this work with the v2 inferno premium edition if you have the slp tank to. Sorry it sounds stupid but just wanting to be careful View answer
Hi there. Can I use this Tank with my Wolverine HPA engine? I have recently installed it and I need help on which tank to buy thanks! View answer
