Could you also use this to run 2 outputs from the asa? View answer
Amped Custom Dual Port Fill Adapter UFA
Is this made for two 48/3000 tanks or just 13/3000 tanks? View answer
Amped Airsoft | Amped Custom Dual Tank HPL Tippmann Rig
Is there a way I can hook up 2 hoses on this slp rig? View answer
Amped Airsoft HPA SLP Regulator
How would this fit into a fusion engine? It doesn't look like the spring would fit into the slot for the nub on the back of the trigger. View answer
Speed Airsoft HPA M4 Tunable Trigger | Blade
Do these tanks come filled? View answer
Is there an option to include a PTC or slide check fitting when you purchase an IGL? View answer
Amped Custom HPA Tippmann Integral Grip Line
Can you also use these in substitute for the spring on a hop up unit? View answer
Amped Airsoft Replacement O-Ring Set for HPL & Couplers | Pack of 10
Does the Spartan include the gun side quick release air connector? View answer
Wolverine Airsoft INFERNO GEN 2 Spartan Edition for M4 / V2
So am i right to assume that this will NOT work with my Gen 1 wovlerine SMP? View answer
Wolverine Airsoft 18" Wire Harness | GEN 2 Latest Edition
If I chose to get the custom engraving where does it go on the regulator? View answer
Amped Airsoft SLP Regulator | Amped HPA SLP Rig
When will this be back in stock? View answer
PolarStar Fusion Engine V2 Player Package | Standard FCU
Does this gun come with the stock barrel otherwise what barrel does it have? View answer
Amped Custom HPA Rifle G&G Combat Machine CM16 Wild Hog 13.5" | Black
What is the material they're made out of? View answer
Foster Male 1/8" NPT Quick Disconnect Plug HPA | Mag Fitting
Can this work in a jack View answer
PolarStar Fusion Engine Solenoid | PolarStar Solenoid R107
How would I attache the tippman remote line to it. Does this regulator come with that attachment point and if not where would I get it View answer
Wolverine Airsoft STORM InGrip Regulator | CO2 Ready!
hello when will this be able to purchase View answer
Amped Custom HPA Black G&G Combat Machine CM16 Raider Short
when will this be able to by with the spa installed because it says its currently unavailableplz hurry my birthday is soon View answer
Amped Custom HPA Black G&G Combat Machine CM16 Raider Long
What type of JST connector is this, exactly? I forgot to order an adapter, and will now have to solder it myself : ) View answer
PolarStar FCU | Fire Control Unit | Revision 3
This is meant to fit into GBBmags to HPA tap them right? if so, can this fit in WE/TM Hi Capa mags? View answer
Would this be equivalent to a male Foster QD, and what else would I need to fill at home with a high-pressure hand pump? View answer
How often do you guys restock these? View answer
Hi, i am just getting into the HPA side of airsoft and was wondering will I have to get this tank tested like paintball tanks and things like that? View answer
What psi do you have to run these at? View answer
CQB Russian HPA Adapter HPA Tap | KWA, TM, WE, JAG, & KJW
Can I use this with the PIGL. View answer
PolarStar Milsim Fitting | 90 Degree Rear Macro Fitting
Hi there, sorry silly question but just so I am clear this is compatible with the factory wolverine storm reg and lines, correct? View answer
Do you know if the classic army mp5k pdw uses a standard M4 length nozzle? View answer
Wolverine Airsoft GEN 2 INFERNO Nozzle Assembly
I use my P* with 20" barrel at 520 fps. Is there any point to install Low Flow Poppet with S2 Lightning Banjo or S2 LB will be sufficient? View answer
PolarStar Fusion Engine Red Low Flow Poppet (.0625)
Polarstar r3 fcu plz get it in want it plz View answer
Are they coming back in stock View answer
I'm having a problem with my jack the first or second shot when I start shooting just barely rolls out of the barrel and I have the flu set to f1 View answer
PolarStar Jack V2 HPA Unit | Standard FCU | V2 M4 HPA Kit
When will these be back in stock? I would love to get me one :-) View answer
Which valve for the echo1 timberwolf? View answer
Can I swap just this poppet hat with my stock one? My PolarStar burns air: only ~800 shots from a 48/3000 at 75 PSI with a red nozzle. View answer
Amped Custom | Low Flow Pre-Shimmed Purple Poppet
what is the average Shot count on this tank. i am running a polstar jack at around 90 psi View answer
Looking for the G&G version or will this work on my G&G SR25? If so restock plzz View answer
PolarStar Fusion Engine SR25 Spacer Kit | A&K and ECHO1 SR25
Hi everyone,what I need for installing JACK unit? I need better Gearbox (CNC aluminium) or is OK standard gearbox...ordinary? Thank you guys. View answer
What is a buffer tube? I know what the rail and external barrel are, but not this term. Do you have pictures? View answer
Amped Custom HPA Rifle G&G Combat Machine CM16 Wild Hog 12" | Black
Can this adapter fit int the mags for the TM 5-7? View answer
The threads on my Ninja LPR remote line's female quick disconnect are slightly larger. What coupler do I need to connect this? View answer
Ninja Slide Check | HPA Regulator Accessories
Ou, I forgot. Which parts are polymer (plastic) and which aluminium (entire length body, orange suppressor,...) ? Thank you. View answer
What is a 'stock gearbox,' can the suppressor be removed or swapped for green/black, and do you carry a silencer for the inner barrel? View answer
This gun will come with the jack pre installed right? View answer
My Gen 2 FE wires quit and the Gen 1 swap worked, so would I be able to put this in my Gen 1 Fusion Engine? View answer
PolarStar Wire Harness 18" for Fusion Engine, JACK, F1, F2
now what type of regulator would you recommend View answer
Ninja 62/3000 Aluminum Air Tank | HPA Tanks
Is there anything on the tank itself to indicate it's an SLP tank? I bought two used Ninja 62/3000 tanks and can't tell. View answer
Which one willl fit a matrix .45 detonix View answer
Do you have to use SLP Tanks with this setup? I saw you must use one or the other for both tanks? View answer
Amped Airsoft Dual Tank SLP Rig | HPA Rig
When will this be back in stock? I'm dying to get one of my own. View answer
Amped Custom HPA Krytac War Sport LVOA-C
Will this work with Amped Custom HPA Rig - SLP? Overall, ill be using the wolverine inferno gen.2 for M4. View answer
Is it possible to fit a bluetooth fcu on a gen1 inferno spartan edition?? View answer
