is it complete are all of the connectors their or will i have to take one of the connectors off of my original wiring harness View answer
PolarStar Wire Harness 13" for Fusion Engine, JACK, F1, F2
Looking to build up a king arms 9mm sbr pdw, will this fit? And what else would I need for the engine besides an air source? View answer
PolarStar Jack V2 HPA Unit | Standard FCU | V2 M4 HPA Kit
hello what size is this nozzle because i just bought a maxx hop up and it accepts the nozzle length from 21.00mm to 21.25mm View answer
Amped Custom | Fusion Engine Plus Nozzle for M4 | Purple
when will this be able to by with the spa installed because it says its currently unavailableplz hurry my birthday is soon View answer
Amped Custom HPA Black G&G Combat Machine CM16 Raider Long
Ou, I forgot. Which parts are polymer (plastic) and which aluminium (entire length body, orange suppressor,...) ? Thank you. View answer
Amped Custom HPA Rifle G&G Combat Machine CM16 Wild Hog 12" | Black
What do the tick marks between 80-120 represent? Trying to fine tune to 100psi but unsure on where it sits on the regulator View answer
Amped Airsoft SLP Regulator | Amped HPA SLP Rig
I accidentally ordered this tank instead of the SLP regulated one and already got the slp regulator how can I return this View answer
Ninja 48/3000 Aluminum Air Tank | HPA Tanks
Hi Like the nozzle, but was wondering if you are going to build them for the V3 also specifically for the AK & G36thanx View answer
Is the gunside male fitting included with this line as well, or will I have to buy the Ninja PTC Male fitting separately? View answer
Amped Airsoft | Amped Custom Dual Tank HPL Tippmann Rig
Since I'm new to HPA what else would I need to purchase with this to complete the rig beside a tank, regulator, and line? View answer
Wolverine Airsoft INFERNO GEN 2 Spartan Edition for M4 / V2
I have a hpa tank that is 800psi output but have the amped airsoft reg how do i lower the output on the tank? New to hpa View answer
Does this kit include everything that you need to Hpa a classic army m249? Excluding the external hpa (tank, reg, hose) View answer
PolarStar Jack M249 HPA Unit | Standard FCU | M249 HPA Kit
When this is back in stock is there anyway to get it with a blue nozzle or would I have to buy it and install on my own View answer
PolarStar Fusion Engine V2 Player Package | Standard FCU
And also out of the box do will I need to do the setting on the fcu or can I just run it straight outa the box? Thanks. View answer
Amped Custom HPA G&G Combat Machine CM16 SR-S
I am looking for a new tank and I have the regulator already but I want to make sure my regulator works with this tank View answer
Ninja 62/3000 SLP Aluminum Air Tank | HPA Tanks
Would this be a good beginner hpa.How would y'all run this and keep it under 600 dollars. Sorry for myBad punctuation View answer
Amped Custom HPA G&G Combat Machine CM16 SR-XL
i am buying a player kit and i am adding a line, trigger and lightning banjo will i have to add 3 of these or just one View answer
Amped Airsoft Services | Install Nozzle, Poppet, or Line
Is it possible to run this with Tippmann 26/3000ci tanks in a fully collapsed Haley strategic flat pack, zips sealed? View answer
I know that solenoids on PolarStar FE work ar presure 200 psi, it means than I can use Polarstar FE on this pressure? View answer
I'm building a SSG1 as a first time hpa build. I was wondering if you still have to shave the selector plate little? View answer
What type of JST connector is this, exactly? I forgot to order an adapter, and will now have to solder it myself : ) View answer
PolarStar FCU | Fire Control Unit | Revision 3
Hey there. Ive heard that the box mag cant keep up with the rate of fire? Also, is there any worries with this gun? View answer
Amped Custom HPA Rifle Krytac LMG Enhanced
Would these polarstar jacks fit in front wired airsoft guns. If so would it fit in a g&g combat machine cm16 mod 0. View answer
I have a dead arp9 I want to upgrade to hpa for the 1st time will this jack unit drop in and work with my platform? View answer
What will be the difference between the F1 for m4 kits and the jack and when will the F1 be avalable for pre-order View answer
When will the TechT gun sav performance grease and the and the Speed airsoft hpa trigger blade in red be in stock? View answer
I have installed the regulator to my gun, what do i need to buy to set the psi on it when its mounted on the tank? View answer
Wolverine Airsoft STORM InGrip Regulator | CO2 Ready!
Will this fit in a Wolverine High pressure regulator with the male part and in a Wolverine Bolt with the female ? View answer
Amped Line | Amped HPA Line Standard Weave
What does the 'Dark Spectrum' colourway look like? I can't see any photos of this new option.Thanks in advance. View answer
Amped Custom High Pressure Line | HPL | Tippmann or Storm
Does this have a valve in it so that when it is not connected to a male connector it will not allow air to flow? View answer
Amped Line Foster Quick Disconnect QD Regulator Adapter
I have a echo 1 Troy with a 4 inch barrel. Could i use this setup with my gun? Very excited to get a polar star! View answer
I have a redline regulator, I should definitely also buy the redline adapter that comes with your line correct? View answer
What tank should I get to use this with a hi capa? New to airsoft and am looking at a more affordable hpa setup View answer
How tall is the regulator? I have a really small backpack and I am trying to find out if I need a smaller tank. View answer
Hey so I plan on fitting this setup to this specific gun. Would it work? https://www.evike.com/products/74811/ View answer
Does unscrewing the cap turn the tank off? If so, must that be done before screwing it on or off of the tank? View answer
Amped Custom | Amped Fill Adapter | UFA | Green
Will this valve work on Sig Sauer 13ci air tank? Original fill valve lasted one fill and started leaking down View answer
Ninja - Mini Fill Valve Complete Assembly
Did you ever figure out if this works for the A&K / Cybergun FN Licensed "Middleweight" M249 SAW Machine Gun? View answer
Does this work with quick disconnects that have shutoff springs inside? Those tend to require longer shafts. View answer
Amped Line Foster Mini Quick Disconnect Plug | Fitting Only
Does this come with the battery already or do I have to get that separate?and when will it restock currently View answer
Would this tank last longer than the 48cu tank for a day of playing even though they both hold the same psi? View answer
Do you know when it won't say "Sorry, all Bas Gun Used options for this product are currently unavailable"? View answer
Amped Custom HPA Rifle - G&G Combat Machine CM18 MOD1
I have an older air rig that came with my V2 first gen polarstar, but it has the mini line, will this work? View answer
Is it possible to set the Inferno Gen2 Spartan Edition to Safe-Semi-Semi without modifying the tapet plate? View answer
I bought a hk army 48/3000 tank but i saw something about a slp regulated tank do i need to buy a slp tank? View answer
So with the red nozzle is it possible to shoot at 300/350 fps or would I need a different nozzleAnd poppet View answer
if i get this with an upgrade trigger will it come installed in the gear box or will i have to install it? View answer
If I select a different trigger, would it come separate? and if so, how would I get it installed? -Thanks View answer
Will this work with Amped Custom HPA Rig - SLP? Overall, ill be using the wolverine inferno gen.2 for M4. View answer
Ninja 62/3000 Aluminum Air Tank | HPA Tanks
Hows the refresh rate on this? Im planning on using this on my we scar l gbbr with a hpa tapped drum mag. View answer
