Hi Like the nozzle, but was wondering if you are going to build them for the V3 also specifically for the AK & G36thanx View answer
Amped Custom | Fusion Engine Plus Nozzle for M4 | Purple
I accidentally ordered this tank instead of the SLP regulated one and already got the slp regulator how can I return this View answer
Would this work for a mag tapped KWA KMP9 using your "Amped Airsoft SLP QD Air Regulator System 36' Air Hose" off of Evike? View answer
HK Army SLP 48/3000 Aluminum Tanks
So I have a pkm and I'm putting a jack into it. What slot does the solenoid plug to and where do the trigger leads plug to? View answer
PolarStar Universal Plugboard | Universal Switchboard
What do the tick marks between 80-120 represent? Trying to fine tune to 100psi but unsure on where it sits on the regulator View answer
Amped Airsoft SLP Regulator | Amped HPA SLP Rig
Is the line connector covered by the rubber flap? Also, I am new to hpa, will this tank work with most to all guns?Thanks View answer
What is internal grip lineWhat is tournament regulator lockWhat is performance grease Why do you need battery for hpa View answer
Amped Custom HPA Starter SLP Air Rig Kit | Tank and Air Rig
Does the Amped Custom HPA Starter SLP Air Rig Kit | Tank and Air Rig come with tank regulator and line all in one for 144.99 View answer
Hi i want buy "Tippmann 26/3000 Aluminum HPA Tank | HPA Accessory" I want to know if it is possible to ship to South Korea?? View answer
Tippmann 26/3000 Aluminum HPA Tank
Ou, I forgot. Which parts are polymer (plastic) and which aluminium (entire length body, orange suppressor,...) ? Thank you. View answer
Amped Custom HPA Rifle G&G Combat Machine CM16 Wild Hog 12" | Black
when will this be able to by with the spa installed because it says its currently unavailableplz hurry my birthday is soon View answer
Amped Custom HPA Black G&G Combat Machine CM16 Raider Long
hello what size is this nozzle because i just bought a maxx hop up and it accepts the nozzle length from 21.00mm to 21.25mm View answer
I am setting this up with two 26/3000 tippman tanks for my first hpa setup, what regulator would you recommend to go with it View answer
Amped Custom Universal Dual Up to 26/3000 Tank Adapter
Looking to build up a king arms 9mm sbr pdw, will this fit? And what else would I need for the engine besides an air source? View answer
PolarStar Jack V2 HPA Unit | Standard FCU | V2 M4 HPA Kit
is it complete are all of the connectors their or will i have to take one of the connectors off of my original wiring harness View answer
PolarStar Wire Harness 13" for Fusion Engine, JACK, F1, F2
hi i like the look and was wanting an all black line, do they all. come with the green part at the tank end?.......thank sean View answer
Amped Custom High Pressure Line | HPL | Tippmann or Storm
I just purchased this new to HPA does this have a IGL I really don’t know how to install one my self and I just bought this View answer
Amped Custom HPA G&G ARP 9 CQB Airsoft Rifle | Black
Can you just toss this thing on to any airsoft tank? just plug and play? Or is there something that I have to do before hand? View answer
Redline Mini SFR Regulator Stand Alone w/o Line
Will the grip connect fit Wolverine Inferno macro lines? I read that it is compatible with new gen 6mm p* macro lines. Thanks View answer
Redline Grip Connect | HPA Grip Connect
I have a polarstar fusion engine and a firebase air regulator. Would I need to get the dual quick disconnect on the air line? View answer
Amped Line | Amped HPA Line Standard Weave
My rig outputs 150-155 PSI until I hook lines, then drops to 125 and won't recharge higher. Break-in issue or need a better regulator? View answer
Is the quick connect a 1/2 inch so I can plug it into my air compressor and the other and so I can xxxx it into my regulator? View answer
Amped Airsoft Shop Compressor to Regulator Adapter
would this be a valid replacement for the fitting on the CA m132 microgun using a male foster with 1/8npt threads for the end? View answer
Amped Custom HPA Tippmann Integral Grip Line
I tried putting this in my g&g gearbox with inferno gen 2 electronics... it didnt fit. Any suggestion on trying to make it fit View answer
Speed Airsoft HPA M4 Tunable Trigger | Blade
is this regulator compatible with https://ampedairsoft.com/ninja-48-3000-aluminum-air-tank-slp-ninja-paintball-tank/ ? thanks. View answer
When i choose all these upgrades do they come installed with the gun already or do i install it myself when the gun gets here ? View answer
Is there a difference in specifically the tigger linkage for the v2 and the v2.5 or "v2 extended" or is it just a nozzle change? View answer
PolarStar Kythera SA | Fully Mechanical Semi Auto HPA System
I just purchased an EMG STI and can't seem to find the matching tap for the mags. Any way anyone here knows a matching company? View answer
My SLP rig is not having very good recharge rate on the PSI guage and messing up my performance what do you think that could be? View answer
kind of a dumb question, but I have a magpul moe grip and i was wondering could the base plate crack when i try and drill it out View answer
What hpa version kit of any would fit the g&g Cm18? The lower receiver it kinda odd and I’m not sure the proper kit to fit that View answer
PolarStar UGS Universal Gas Stock Combo Kit | HPA Air Stock
Hi there, sorry silly question but just so I am clear this is compatible with the factory wolverine storm reg and lines, correct? View answer
CQB Russian HPA Adapter HPA Tap | KWA, TM, WE, JAG, & KJW
Hi! Can i use this regulator with a Ninja 90/4500 Carbon Fiber Air Tank or do i need the Ninja 90/4500 Carbon Fiber Air Tank SLP? View answer
Amped Custom HPA Rig | Redline Mini SFR Dual Tank Air Rig
Hi, I was wondering if this will fit in a Gen.1 Fusion Engine and if the shims are necessary for it to function properly. Thanks! View answer
PolarStar Fusion Engine Gold Low Flow Poppet (.0465)
About MAC Airsoft XDS Drop stock aluminum and carbon fiber. Can battery be inserted into the carbon pipe without using any tools? View answer
Advanced Novelty Tech CO2/HPA Conversion Kit
I am overwhelmed with the choices. I want to get one that fits the bigger ninja tank option. Please tell me which options to pick View answer
Does this still include everything to install it like trigger board, wire harness, line etc, or is it just the engine and the fcu? View answer
PolarStar x Amped GOLD Edition Jack V2 HPA Unit | Standard FCU
Hi I have researched a lot and looked at polarstars website but I cant find that it fits the classic army m4 can you confirm that? View answer
PolarStar Fusion Engine V2 M4 | Red Poppet and Nozzle
I have a wolverine and i bought about 9 months ago around spring break last year. Will this work even though it says newer version View answer
Wolverine Airsoft 14" Wire Harness | V2 M4 Latest Edition
I have a speed trigger (brand speed I think that’s the brand) and I was just wondering if it is compatible with the n7 mild I’m View answer
Redline N7 GEN-2 HPA Unit
Do you have to get an slp tank for airsoft? Even with a regulator like the redline mini sfr. I can't just get a tank that isn't SLP View answer
HK Army 68/4500 AEROLITE Carbon Fiber Tank | SLP
Would this fit the hi capa mags that come with that Evike pistol, and would the Primary Airsoft hi capa TAPP work with it and this line? View answer
I received two different solenoid types for the Fusion Engine. Do I need to return one, or will both work properly in my engine? View answer
PolarStar Fusion Engine Solenoid | PolarStar Solenoid R107
Will this fit as a direct gearbox replacement in my SBR Salient Arms, or will it need tinkering? I've had alignment issues before. View answer
PolarStar Fusion Engine V2 Player Package | Standard FCU
Does this work with an Amped air line, or is the tip too short to seal compared to the Mancraft 4mm gun-side mini QD? View answer
Would this fix my issue connecting the starter line and tank combo to my Tippmann M4 Carbine CQB Edition? View answer
How do these systems compare to the F1 in terms of reliability and performance? Wanting tips before my Black Friday order. View answer
Wolverine Airsoft INFERNO GEN 2 Spartan Edition for M4 / V2
Will this work in the G&P Transformer and an old-style G&G CM Raider, and what else would you recommend for the rest of the HPA setup? View answer
New to HPA: should I store my tank and regulator connected or apart, and will the tank leak air without the regulator attached? View answer
What's the max output of this regulator: 160 or 200 PSI? And what connector attaches the hose to the gun? Building something custom. View answer
