Can I store my SLP tank with air pressure inside while leaving this regulator connected to it? View answer
Amped Airsoft SLP Regulator | Amped HPA SLP Rig
For an MP9 TAPP drum mag setup, what's the difference between the tournament locks, and do I need a battery or is that for PolarStar? View answer
Amped Custom HPA Starter SLP Air Rig Kit | Tank and Air Rig
Can you tell me when the Amped version of the Firehawk will be back in stock? It's never available when I check. View answer
Amped Custom HPA G&G Combat Machine Fire Hawk AEG
Does the Jack for the FN Herstal M249 come with the trigger board and correct nozzle, or is there anything HPA-wise I'd need to buy? View answer
PolarStar Jack V2 HPA Unit | Standard FCU | V2 M4 HPA Kit
Why does my Redline Mini SFR gauge needle drift up or down until I release air from the hose? It's only a couple months old. View answer
Amped Custom HPA | Redline Mini SFR Air Rig w/ Amped Line
My rig suddenly started leaking from a hole where the tank connects to the regulator every time I connect the tank. Why? View answer
Would this fit through the handle of my Krytac Trident MKII CRB, or will I need to Dremel it down like my friend did on his? View answer
Amped Custom HPA Tippmann Integral Grip Line
Which thread type fits the standard Elite Force Glock magazine? I use the standard mags on my Glock 18C, not the extended. View answer
TAPP Airsoft Titanium HPA Tap | TM, WE, KJW | HPA Adapter
Can I run just one tank on this dual setup when I don't need both, like at a local field versus a milsim? View answer
Amped Custom Any Size Dual Tank Upgrade Kit for up to 90/4500 Tanks
Best nozzle and poppet combo for efficiency at 70-80 PSI (Redline SFR) with a 350 FPS field limit? 6.01 300mm barrel, stock G&G hop up. View answer
Amped Custom | Fusion Engine Plus Nozzle for M4 | Purple
Is the LiPo battery in this bundle needed for my Marui hi capa HPA setup, or is it only for PolarStar-style engines? View answer
Will the Redline grip connect work with my VFC MK18 with the Redline SR-M Hurricane V2? I keep ripping the fitting off my macro line. View answer
Redline Grip Connect | HPA Grip Connect
Where exactly does this lube go: nozzle, poppet valve, etc.? And can I use it in my F1 even though it says mainly for FE? View answer
TechT 1oz Gun Sav Lubrication | Internal Lubrication
Does the Elite Force Glock 18C extended mag fit into the Primary Airsoft M4 mag adapter? View answer
Can this be used for CQB? Converting my ASG Scorpion EVO A3 AEG to an HPA SMG without the battery and electronics. View answer
Redline N7 GEN-2 HPA Unit
Will this fit the Elite Force gearbox as my first HPA system, and would your SLP rig work better with it than other options? View answer
PolarStar Kythera SA | Fully Mechanical Semi Auto HPA System
Will this work on my ARP 556, and is it all I need besides tank, regulator, and line? Is the trigger more sensitive than stock? View answer
With this nozzle, purple poppet, Lightning banjo, and 280mm barrel, can I tune the PSI low enough for 320 FPS with .20s? View answer
Will 120 PSI get me 300-350 FPS, is it safe to run, and how many rounds will a 48/3000 tank give? Hoping for 1000-1500. View answer
Can I order this remote line without the attached reducer so I can thread in my current hose, and would it be any cheaper? View answer
Amped Custom Universal Dual Any Size Tank Adapter
Is 360 FPS with .25g BBs possible at 70-80 PSI with a red poppet, QEV banjo, Madbull 6.03 363mm barrel, and stock blue bucking? View answer
Is this compatible with the Redline Mini SFR stand-alone regulator and the Primary Airsoft Glock HPA M4 magazine adapter? View answer
Amped Line | Amped HPA Line Standard Weave
Do these valves require drilling a hole through the base plate of my KWA MP7 magazine? I don't want to damage a hard-to-find mag. View answer
CQB Russian HPA Adapter HPA Tap | KWA, TM, WE, JAG, & KJW
What are the barrel threads on this gun? I want to buy a suppressor or tracer at the same time and don't want the wrong threads. View answer
Amped Custom HPA SIG PROFORCE MCX VITRUS Airsoft Rifle
With an AEG plus this and a PolarStar Jack, do I need anything else? What compressor fill adapter, battery, and charger should I get? View answer
Does the M4 version of this kit include everything to drop into a gearbox like the AK and M249 versions, or are FCU and line separate? View answer
Wolverine Airsoft Inferno GEN 2 for M4 | Premium Edition
Does the CYMA SVD offset package include the F2 FCU board, trigger module, and the offset nozzle shown in the picture? View answer
PolarStar F2 Offset Kit for CYMA SVD
What's the barrel thread direction, does this gun take standard M4 mags, and are the side rails M-LOK? View answer
Building a Lancer Tactical M4 with your HPA starter kit and Jack. Can your shop techs install it, and do I need anything else? View answer
Will this solenoid work in my V3 Fusion Engine? The description says all FE, but mine has wires out the top, not the back. View answer
PolarStar Fusion Engine Solenoid | PolarStar Solenoid R107
Brand new to HPA and want a G&G SSG1 HPA. What do I need, and what should I pick for all the options under the gun? View answer
Amped Custom HPA SSG-1 USR SpeedSoft Airsoft Rifle
I unscrewed the green xxxx all the way and can't get it back on, and my tank is full of air. How do I reattach it? View answer
What does the checkered flag line color look like? It doesn't seem to be shown in the pictures. Is there a link to view it? View answer
Do I need an adapter to connect the Amped line to a Primary Airsoft adapter tip (male) for my hi capa HPA setup? View answer
Can you make the dual-tank connecting line in custom sizes? I want to link two 15ci tanks on opposite sides of my speedbelt. View answer
Which fitting do I need to connect the stock macro line on a PolarStar Jack? I bought mine used without that piece. View answer
Would this be compatible for installation on the PolarStar Kythera, mounted on a Magpul MOE grip? View answer
Would this engine or the Redline N7 Milsim fit the gearbox in my EMG Umbrella Corp M4 M-LOK AEG? If not, what shell do you recommend? View answer
Will this product work with the Redline Mini SFR air rig? New to HPA and want to be sure everything works before investing. View answer
Ninja 62/3000 Aluminum Air Tank | HPA Tanks
Will you offer the Kythera in a PolarStar beginner package that includes the tank, regulator, and air line? View answer
How touchy is this reg to install and remove safely from Ninja, First Strike, and Empire 4500 bottles, since it depresses the tank pin? View answer
Will the Jack shipped from you be the 1.1 or 1.0 version? I want to be 100% sure before I order my IGL. View answer
Buying the Inferno player kit here for my ARX160 install. Do I order now and ship my gun and custom nozzle, or wait for the kit? View answer
Amped Airsoft Tech Service Fee for HPA & AEG Repairs / Upgrades
Would this kit work for the AAP-01, and which TAPP adapter fits AAP-01 mags since they're standard Glock mags? View answer
Do this line and the Tippmann 48/3000 tank come with a tournament lock, or can I use a zip tie to lock my tank after chrono? View answer
Amped Custom High Pressure Line | HPL | Tippmann or Storm
Will this (with the required SLP tank) work for a basic HPA-tapped GBB SMG, or is it only for PolarStar and Daytona setups? View answer
What's the ideal Fusion Engine setup for my KWA KM4? The nozzle choice in particular has been keeping me troubled. View answer
PolarStar Fusion Engine V2 Player Package | Standard FCU
Does this starter kit have everything needed to run my hi capa with a Ninja 48/3000 tank out of the box, or what else should I buy? View answer
Does this gauge read up to 160 or 220 PSI? Upgrading to a high-pressure spring for 200+ PSI and photos show both versions. View answer
PolarStar MRS Regulator | Modular Regulator | w/o Line
How did this gun perform at the Milsim West game Matt took it to, and would you recommend a PolarStar/HPA or running it stock? View answer
Amped Custom HPA Krytac War Sport LVOA-C
